Climacab

Big Rig Products

Climacab

Warranty

2 years

System Weight

185 Lbs

Recharge time

4-6 hours

Cooling operation

greater than 10 hours

Battery Requirements

400 amp hours, 4 deep cycle batteries

Cooling Capacity

8,000 BTU/hr

Fuel savings vs engine idle

3,000 gal./year

Fuel savings vs diesel APU

600 gal./year

Components:

The evaporator unit normally is surface mounted onto the interior of the back wall inside the sleeper. This is where the conditioned air is blown into the sleeper. Hence no ducting is required and optimum air distribution is achieved. The dimensions are approximately 20" tall, 22" width, and 5" depth. The evaporator unit weighs 19 lbs.

The condensor unit (not shown) normally mounts under the sleeper and attaches to the support members. The condensor unit is approximately 13" length, 26" width, and 15" depth. Weight is 56 lbs. AC lines are connected between the evaporator unit and the condensor unit.

In addition there is a power management unit and the control panel. The power management unit primarily isolates and regulates the charging for the accessory battery bank. Paramaters with respect to battery voltage maybe changed to users preference from the control panel.

To view more information on Climacab click here. You will be linked to the factory website.